Task 5 – Anheuser-Busch Beermaster Brewery Tour

(05) Visit a winery or brewery & take the tour

Activity:    Anheuser-Busch Beermaster Brewery Tour

Location: 221 Daniel Webster Highway,  Merrimack, NH 03054

Website: www.budweisertours.com/

Cost:         $25.00 per person

When:       October 21, 2011

Rating:     5-Stars

If you haven't tried the un-pasteurized beer straight from the cold finishing tanks at the Anheuser-Busch Merrimack Brewery then you really haven't tried beer at its best. With the Anheuser-Busch Beer Master Tour you get to do that and much more.

When you arrive at the brewery welcome center for your tour expect to spend some quality time with your tour guide and be prepared to drink some beer. Your Anheuser-Busch tour guide will start by sharing some interesting company history while you sample your first beer. We tried the Shocktop Pumpkin Wheat. Your tour guide will then show you the magic in a step by step tour from the raw ingredients to the cold frosty end result.

You start the walking tour in the perfectly manicured grounds looking at the hop garden. There the guide will explain that hops are cone-shaped blossoms and is the spice of beer.  You learn that hops contribute the bitterness that balances the malts sweetness.

Before entering the building they walk you by the grain handling area and you begin to appreciate the true scale of the operation in Merrimack. The train cars filled with grain dwarf humans and automobiles alike.

When you enter the building you are immediately looking at the bottom of the huge mash tanks. After a quick elevator ride you find yourself learning the intricate process of beer making in their master control room. Here you get to ask questions to the guys making sure that every step of the process is going exactly as they planned.  The room has a wall of monitors you would expect to see at NASA. Each screen represents a different step in the process and with the click of the mouse they can control and makes changes on the fly when required.

Next you venture out into the tank room controlled by those guys. The first set of tanks are where the mashing process takes place. The mash tanks are where they combine ground barley malt and water. Next to it is the cooker where they mix milled rice and water. Eventually, boiled rice is mixed with the malt in the mash tank.  This is where step one in the magical process occurs. When combined the natural enzymes the malt breaks down the grains starch into fermentable sugars.  This malty liquid is called wort.

Next, the converted mash goes into the Lauter Tuns where the mash is strained and the wort is slowly drawn off. This process takes over an hour to complete and once complete the wort is moved to the Brew Kettle where the secret blend of hops is added. Here the wort and hops are vigorously boiled and the liquid is again strained and cooled in sterile conditions.

Once cooled the wort  is moved to the fermentation tanks. In the fermentation tanks yeast is added. Here yeast metabolizes the sugar in the wort into ethyl alcohol and CO2 with the help of beechwood chips; they aren't kidding when they say "Beechwood Aged". The Beechwood chips enhance the fermentation process and are said to create a more crisp and naturally carbonated beer.

It is then moved to the finishing tanks where it takes 30-45 days to age to perfection. This is also where the beer is filtered if desired. This was my favorite stop as we again got to sample beer. We got to sample Bud Light which, I am not usually a fan, but I found that it was really tasty right from the finishing tank. If only you could swing by the brewery for fresh beer.

Of course all products have to go through QA which was our next stop. Here we got to see science at work as they tested the beer to ensure consistency and perfection.  We also learned that the Beer Master samples the beer regularly. To do this he has a finely tuned pallet which prohibits him from smoking, drinking anything alcohol based, or engaging in any other activities that might alter those taste buds.

After passing the QA testing the beer is packaged for distribution. It is also pasteurized by heating and cooling the beer which kills the bacteria that causes the yeast to grow. This is done to increase the shelf life of beer from 60 days to about 120 days.  The bottles and cans are washed, filled, capped, sealed, pasteurized, labeled and boxed in a nearly automated system of conveyors, lifts, flippers and all kinds of crazy things.

Once completed the tour ends in the tasting room. Here you get 4 samplers to try which was picked by the tour guide. We tried Alexander Keith's Nova Scotia Style Lager, Stella Artois, Redbridge, Shock Top Raspberry Wheat & Rolling Rock. We got one extra because I asked to sample the gluten free Redbridge.

Then you get one more full size sample. I choose the Shock Top Raspberry since I prefer unfiltered beer.  Let's just say by this point everyone in the group should at least be feeling good. Before leaving the brewery to see the horses we got a surprise care package which included our honorary Beer Master Certificate and a 12oz Anheuser-Busch glass to take home in addition to the hat we received at the beginning of the tour.

After the tour is over you have the option of going to see the clydesdales in their barn. The beautiful horses are an icon of Anheuser-Busch and have been almost since the beginning. It was a little cold so we didn't stick around very long but got to appreciate their size and mild mannered disposition.

Task 38 – 2011 Jack-O-Lantern Spectacular @ Roger Williams Park Zoo

(38) Visit 10 Festivals of Fairs (06/20)

Festival:    Jack-O-Lantern Spectacular

Website:    http://www.rogerwilliamsparkzoo.org/jols/

When: October 6 - 31, 2011

Rating: 4-Stars

This past weekend Dan and I braved the two hour long line and experienced the amazing glow of over 5000 pumpkins all intricately carved with painstaking detail at the Roger Williams Park Zoo Jack-o-Lantern Spectacular. They were displayed according to this year’s theme of “A Journey Around The World”. It includes pumpkins of all different sizes from the smallest sugar pumpkins to the biggest pumpkin I have ever seen weighing in at over 1600 pounds all carved with iconic images of places and people from around the world and depicting scenes from the Seven Wonders of the World. It also included representations of nations from around the world including a European Vacation and a trip through the Great North complete with falling snow. The main centerpiece was the Laughing Tree with its branches covers with pumpkins and surrounded by its army of pumpkin followers.

The Spectacular was founded by John Reckner, an Oxford, Massachusetts postal carrier. Inspired by a Vermont farm he had seen lined with glowing jack o’ lanterns, Reckner organized the first Jack-O-Lantern Spectacular in Oxford in 1988. The 185 jack o’ lanterns featured in this first Spectacular were carved by local residents and displayed for only one evening on a hillside behind a local school. About 300 spectators attended. Today, Mr. Reckner, his family, and their crew of jack o’ lantern artists continue to bring the Spectacular to life, thrilling tens of thousands of visitors each October.

If you live anywhere within driving distance of Providence, RI it is definitely worth the trip. It is open nightly through Halloween night beginning at 6 pm (be aware that weekends have long lines) and going until 10 pm for a cost of $14 for adults. Use your AAA Membership to save $2.

Dragon Kite

Over the summer, on one of my better tag sale adventures, I purchased a 76” kite for $2.00 which when flown looks like a dragon in the sky. We really haven’t had a very windy day and so it sat in the corner still in its original packaging.

Today with the winds howling I thought it would be an idea day to break out the new kite and let it take its maiden flight. Dan and I made our way up to Green Hill Park where we knew the winds would be ideal and picked a spot away from most of the people enjoying the park. Surprisingly there was only one other person out with a kite and he seemed to be having a great deal of difficulty keeping his kite in the air.

Hoping to have better luck we carefully unpacked the kite and got it all set up. I discovered that there were two options when configuring the wing setup and picked the one closest to the body structure.

The kite quickly took flight and as quickly crashed into the ground. This back and for went on for about 10 minutes before I decided to take another look at the wing configuration. I discovered that the main supports had almost come undone. I tightened them and put the wing supports in the option farthest out on the wing to give it more stiffness.

I offered the string to Dan and this time the kite went right up and flew consistently. I got some great pictures of it soaring high above in the sky. It crashed a few more times but mostly because the wind was finicky and was howling one minute and gone the next.

I took the controls for the second half and enjoyed flying the kite much more once we got the kinks ironed out of the wings and untangled the string.

It did provide almost 90 minutes of fun for us both and it was a great way to spend a relaxing weekend. I am sure that Dan and I will be flying this beauty again. Here are a few pictures of the Dragon Kite.

 

My Dragonfly Passengers - Autumn Meadowhawk

Every day after lunch the guys and I take a walk through a neighborhood near where we work. We see dragonflies everywhere. They have never landed on any of us, that was until today. Today a pair of Autumn Meadowhawk’s (Odonate sympetrum vicinum) landed on me. At first I stopped moving thinking I might scare them away but when it became clear that they had found a spot they were happy to stay I continued on my walk with them as passengers. I have always been fascinated with Dragon flies and spent countless hours chasing them around my yard trying to get a good photograph but really knew nothing about them.

After a little research I discovered that my passengers were a dragonfly known as an Autumn Meadowhawk. It was fairly easy to identify with a photo in hand and I quickly discovered that it had to be a dragonfly and not a damselfly because while it rested, its wings were spread out and extended horizontally, perpendicular to its body. Damselflies hold their wings together and parallel to their bodies when at rest.

Once I determined that it was a true dragonfly, I did a Google search for red dragonfly’s and discovered that this is a Meadowhawk (a member of the skimmer family). To find the exact species, I compared my photo with others. Based on habitat, the season, and the distinctive red stigmata (dots on its wingtips), I determined that this bright red dragonfly must be an Autumn Meadowhawk. Here in New England, the Autumn Meadowhawk is a late-season dragonfly, often found in grassy meadows and wetlands from early October through November. This species is widespread in the United States and southern Canada, from the east coast, throughout the midwest and westward to the pacific northwest and northern California.

Dragonflies and damselflies serve an important environmental role in a capacity as natural mosquito control. Dragonflies spend most of their life-cycle as waterborne nymphs. During this immature stage (which can last anywhere from two months to five years, depending upon species) dragonflies inhabit swamps, ponds and slow-moving streams, feeding mainly on mosquito and other fly larvae. After metamorphosis, dragonflies continue to serve as adult mosquito predators for the remainder of their lives. Dragonflies are so effective at mosquito control, that many municipalities, parks and private estates purchase and release dragonfly nymphs into wetlands.

I’ve always loved watching these tiny biplane-like creatures as they dart about fields and ponds. Now that I have been properly introduced to the Autumn Meadowhawk and understand a little but about them I am even more fascinated about these beautiful creatures.

   

  

RC Helicopter - Esky Big Lama Outdoor

I haven't received mine yet so this is a stock photo

Ever since the Big E and watching the vendor with the RC helicopters I have wanted one. While I didn’t buy one at the Big E because I didn’t know enough about them to feel comfortable purchasing one there I have finally done it.

After spending far too much time researching the different types of helicopters and which is best suited for a beginner I finally purchased an Esky Big Lama v3 Outdoor RC helicopter.  There were so many options and so many different vendors that I really struggled with which helicopter would be best for me. Here are a just a few things to consider when purchasing a RC Helicopter.

1.   Number of channels:  Each channel on the transmitter controls one action on the RC Helicopter. The number of channels determines how many independent functions can be controlled. The less channels the easier it is for beginning pilots. The more channels the more complete control, maneuverability and realism.

The functions that channels can control include:

Throttle: How fast the main rotor blades spin

Yaw: Turning to face left/right

Elevator: Tilting the main rotors to move the helicopter forward or backwards

Aileron: tilting the main rotors to move the helicopter left or right

Collective: Tilting the main rotors in collective pitch

Gyro:  Turning the gyro or other items

 

	Throttle	Yaw	Elevator	Aileron	Collective	Gyro
2 Channel	X	X
4 Channel	X	X	X	X
6 Channel	X	X	X	X	X	X

2.   Size: If you are planning to flight outdoors you need a helicopter with enough size and power to be strong enough to resist the wind. Most small helicopters simply do not have the size or power to resist being blown away.

3.   Part Cost:  Everything I read says you are bound to crash your helicopter a few times so make sure to pick a helicopter you can easily get parts for and that those parts aren’t overly expensive. For example with my purchase I bought 2 extra sets of blades and an extra battery

Wish me luck as I learn to fly my helicopter. I will post pictures and videos and share my experience.

Task 30 – D&A Pizza (Newton, MA)

(30) Eat in 10 New Restaurants (20/20)

Restaurant: D&A Pizza

Rating: 2 Stars

The interior of D&A was a throwback to the 90's with the quarter-sawn wood trim. The menu board was small and incomplete (given people were ordering pizza by the slice but it was not listed anywhere) and everything seemed to be pretty much the same price. Half the seating area was swallowed by an enormous fridge for over-priced beverages and the trash station. While I do understand that this is a pizza shop with a large take out business and not fine dining I expect a clean and inviting environment.

Much like the interior of D&A the pizza leaves a lot to be desired. While you might expect an Italian style pizza in 'the lake' area of Newton I was surprised to find a Greek style pizza instead. I am generally a fan of a good Greek style pizza, and visually it looked appealing, but D&A missed the mark. The pizza didn't leave me wanting for more even though the portion size was less the generous and I was still mildly hungry after. What it lacked in size and cheese it made up for with grease and an over cooked crust.

More disappointing then the quality of the pizza was the price. It cost$10.99 for a roughly 12 inch pizza and an additional $2.00 per 20oz soda. Total bill was $16.00 for 2. I definitely will not be returning for a pizza again.